Osmio Black Line HP-105 Pumped 5-Stage Reverse Osmosis System
Experience clean, high-quality drinking water every time you turn on the faucet and crystal clear ice cubes, scum-free tea and coffee. Designed for safer, healthier water.
The system uses tried and tested NSF certified components. Removes up to 99% of over 1,000 contaminants and is ideal for homes, fitting neatly inside an under sink kitchen cupboard or up to 5/10 metres away with additional tubing if needed.
Easy installation and maintenance with Plug & Play parts. Backed by 2-year Osmio Warranty with lifetime support. Full, courteous, industry-leading Osmio support provided by experienced professionals.
Revitalised mind, body and spirit with the Osmio Black Line Reverse Osmosis Systems.
The Osmio Black Line HP-105 is a high quality pumped reverse osmosis system specifically designed for safer, healthier water. The system requires a minimum of 1.8 bar incoming pressure and a maximum if 6 bar. (pressure reducing valve required over 6 bar)
With our Black Line Range, we just wanted to make the most affordable highest level water quality system. It's all about the quality of the components.
The system is a big step up from lower priced models which retail from between £80-100. With the Black Line range we have invested in the best quality major components such as the tap, DOW Filmtec Sheets in our membrane, double o-ring housings, thick and robust NSF certified material components made in Taiwan to the highest quality manufacturing standards in the world.
We have also included antibacterial pre filtration, equipped with Nano Zinc powder for antibacterial effects. This prevents biofilm buildup on the membrane sheet surface which can lead to fouling.
This all contributes to a more sanitary and reliable system that is designed to overcome the problems we typically find with lower priced RO systems, especially where most of the components are made the cheapest way possible and better measures are not in place to keep the system sanitary.
If you have over 3 bar pressure you can instead order the EC-105 unpumped model.
• Under counter mounted water filtration system for ease of use.
• Removes up to 99% of over 1,000 contaminants including, lead, chlorine, fluoride, arsenic, heavy metals, asbestos, hardness, sodium, microorganisms and much more.
• Experience clean, high quality drinking water every time you turn on the tap and crystal clear ice, scum-free tea and coffee.
• Premium packaged filters with 6-12 months filter lifetime. High quality components with NSF certification.
• Easy installation and maintenance with Plug & Play parts.
• 10 litre total capacity tank (6 litres ready for instantaneous use).
• Backed by 2-year Osmio Warranty with lifetime support.
• Full, courteous, industry-leading Osmio support provided by experienced professionals.
Which type of tap is right for you?
Osmio 3 Way Tap Option for reverse osmosis systemThe system comes supplied with a high quality single dispensing tap which can be fitted to a sink or worktop by drilling a hole and fixing on the underside. As pictured above Osmio have a wide range of elegant 3 way taps so you can enjoy your filtered water with a single integrated solution for your cold and hot unfiltered water. Click here to browse our range. If you place an order for the system and any of our 3 way taps you will be supplied free of charge any connecting parts required. You will still receive the single dispensing tap as it comes as part of the kit.
Easy installation and Filter Changes
The system comes with an installation ready kit except for a handful of standard DIY tools and can be installed by a competent DIYer or plumber. This normally takes between 30-60 minutes to install. In order to make the running costs efficient, we sell the filters in bundle packs and the reverse osmosis membrane separately as this has a longer life. After ordering the system you will receive scheduled reminders to change the filters via text message and email. The message will contain a link to the replacement set which you can reorder with next working day delivery if you require replacement filters.
Pre-Filtration (Stage 1, 2 & 3) - recommended change every 6-12 months
Pre-filter lifetime can be reduced as a result of the level of turbidity and sediment in the feed water.
This Osmio Black Line Reverse Osmosis System uses high performance pre-filters. Although the pre-filters used in this system are fully efficient in removing chlorine and sediment, they do much more. First, the pre-filters for this system will remove sediment down to 0.5 microns which will more thoroughly protect the RO membrane.
Second, the pre-filters use coconut shell powder carbon instead of granule or block carbon (used in traditional systems) which has up to 10 million times more surface area for greater absorption rates and much longer lifetime.
Third, the pre-filters in this system are also designed to reduce heavy metals such as iron, manganese and rust which can also damage the RO membrane.
Finally, although the RO membrane filters microorganisms at a 99.99% rate,
|1||5 Micron Sediment M||Meltblown||Particles and dust|
|2||0.5 Micron Sediment + Pressed Powder Coconut Shell Carbon||Meltblown +||All of the above + fine|
|Powder GAC||particles, heavy metals|
| ||such as iron, manganese|
| ||and other rust|
|3||5 Micron Sediment Meltblown Particles and dust||Meltblown||Particles and dust|
Reverse Osmosis Membrane (Stage 4) - recommended change every 12 - 36 months
Membrane filter lifetime is higher in low scale areas and lower in high scale areas. It should be changed when purified water at the membrane filter exit exceeds 50 PPM.
Reverse Osmosis is the most advanced technology of water purification in use today. The technique uses a nanotechnology enabled semipermeable membrane which can reduce or remove most harmful impurities found in tap and well water including: microorganisms, nitrates, heavy metals, fluoride, insecticides and much more. Our Black Line Range uses the industry leading, USA made, DOW Filmtec Membranes for solid reliability and performance. The double o-ring housings ensure no leaking problems, filters and pump and other components are made in Taiwan with top end manufacturing quality with NSF certification.
The table below lists the performance of specific contaminants. This is only a partial list of the virtually hundreds of thousands of contaminants that Reverse Osmosis can filter.
Aluminum 97-98% Nickel 97-99% Ammonium 85-95% Nitrate 93-96% Arsenic 94-96% Phosphate 99+% Bacteria 99+% Polyphosphate 98-99% Bicarbonate 95-96% Potassium 92% Boron 50-70% Pyrogen 99+% Bromide 93-96% Radioactivity 95-98% Cadmium 96-98% Radium 97% Calcium 96-98% Selenium 97% Chloride 94-95% Silica 85-90% Chromate 90-98% Silicate 95-97% Chromium 96-98% Silver 95-97% Copper 97-99% Sodium 92-98% Cyanide 90-95% Sulphate 99+% Ferrocyanide 98-99% Sulphite 96-98% Fluoride 94-96% Zinc 98-99% Iron 98-99% Lead 96-98% Insecticides 97% Magnesium 96-98% Detergents 97% Manganese 96-98% Herbicides 97% Mercury 96-98% Virus 99+% TDS (Total Dissolved Solids) 95-99% Hardness 93-97% Estimated Reverse Osmosis Rejection Percentages * Figures given above are estimates of normal performance, under normal conditions and water.
At the heart of every Reverse Osmosis system is the membrane filter. The membrane filter consists of microporous, semipermeable membrane sheets. The average pore sizes on the RO membrane is in the range of 0.0005 mm (0.5 nanometers). The membrane filter has one water inlet and two exits. The feed water first travels through the pre-filters and then to the membrane filter.
At the exit of the membrane filter one of the ports is the rejected waste water which is connected to the drain, while the other port is the purified water which is plumbed to the post-filters.
Osmio Black Line Reverse Osmosis membranes are made of the highest quality Thin Film Composite (TFC) polyamide and are designed to remove a wide variety of both aesthetic and health related contaminants.
You can use our Digital TDS Meter sold separately to test a glass of water and compare to your unfiltered tap water to see the TDS reduction.
With a TDS meter you can establish more accurately when to change the membrane filter and have a good tool to check your water quality frequently.
We recommend membranes are changed no longer than every 3 years or when the TDS reaches over 50ppm.
Post Filter (Stage 5) - recommended change every 6-12 months
The Black Line Post Filter is an NSF Certified Activated Granular Coconut Shell Carbon: NSF.
This coconut shell carbon that acts as a final polisher and mineralizer.
Fitting it to your kitchen:
This system can easily be installed by a handy person or plumber and the kit contains all essential parts and some of your own DIY tools are required.
Before ordering please ensure your incoming water pressure exceeds 1.8 bar. Please note the system and tank dimensions below. RO system and tank can be sited up to 5-10 metres away if necessary from the tap.
The system fits neatly inside a standard 500-600mm kitchen cupboard but if you other appliances such as waste disposal, please check to see if it will fit first.
System Dimensions (L x W x H) 40 cm x 17 cm x 44 cm
Tank Dimensions (L x W x H) 24 cm x 24 cm x 37 cm
The following parts are supplied with the system and need to be installed or used for installation.
The following tools, along with their intended use, will be required in addition to those provided in the kit above:
Electric Drill - Open hole on sink to mount the faucet*
5 mm or 1/8” diamond tip drill bit - Pilot hole for faucet*
12 mm or 1/2” diamond tip drill bit - Main hole for faucet stem*
7 mm or 1/4” tip drill bit - Tubing hole for drain saddle
Adjustable Wrench - Installing feed water diverter valve, metal ball valve and faucet
Phillips Screw Driver - Mount drain saddle
Sharp Scissors or Knife - Shorten tubing if needed